CATEGORIES
Position：Index >> Categories Products
223 products total
[Product] Polyester Staple Fiber
2009-10-16 11:21:26Introduction：Conjugate fiber,produced by bicomponent spinning technology of heterogeneous polyester,having characteristics of superior bulkiness,high resilience and duck down-like touch which is generated through its three dimensional helical structure and permanent crimp.LMF,produced by bicomponent spinning of general polyester and modified polyester,can be melted at lower temperature than normal fiber and bonded with other fibers. Applications:Deluxe toys,sofas and sleeping bags reauiring high bulkiness and superior lightness.Padding,mattresses.
[Product] INSULATOR CAP
2009-10-16 11:18:41Introduction：caps for insulator for overhead transmission lines, composite insulator caps, post insulator caps and electric fittings (malleable cast iron), as well as other malleable cast iron.
[Product] Cemented carbide die
2009-10-16 11:18:10Introduction： Non-standard TC dies:such as cold-heading dies、cell dies、thinning dies、punching dies、forming cam and precisely machincd rolling rings.
[Product] Deep Desulfurzing Device
2009-10-16 11:13:20Introduction：It uses special high-performance desulfurizing agent to desulfurize and purify the raw natural gas,and remove the sulfides from the natural gas, the sulfur content after treatment is lower than 6mg/Nm3, making the quality of natural gas reach high purity. Therefore, it not only prevents H2S from stress corrosion of the equipments, but also avoids the recontamination of vehicle emission due to H2S. Different operation modes such as single tower or twin and multi towers, parallel or series towers can be used according to the treatment gas volume and gas quality, so as to realize the continuity of desulfuration and purification. The desulfurzing agent can be absorbed and regenerated repeatedly, with the characteristics of long time of usage and long changeover time.
[Product] Solid Cemented Carbide tools、Indexable inserts
2009-10-16 10:36:28Introduction：Solid Cemented Carbide tools、Indexable inserts
